[TUTO] How to Flash Vu+ Zero 4K (VIDEO)

What you need before we start:

1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).
2) Image of your choice.
3) Compression software such as 7zip, Winrar, Winzip

1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.

Images for Vu+ ZERO 4K

3. Copy the extracted folder “vuplus” to your USB Stick

Flashing the Receiver.

1) Power off the receiver
2) Insert the USB stick containing the image file possible.
4) Power the receiver on.
5) The WHITE L.E.D will quickly flash two or three times then start to fade in and out slowly.
6) Once completed the WHITE L.E.D will flash rapidly.
7) If in doubt leave the receiver for a full 10 minutes before powering down and removing the USB stick.
8) Power on the receiver, it should now boot into the new image.

 

The flashing process should take approximately two to four minutes to complete, while the receiver
is being flashed it is vitally important that you DO NOT power the receiver down for any reason as
this can cause serious and or permanent damage.

https://youtu.be/fIF_eoxDdOk

Author

admin4k