Home »
Posts tagged upgrade
How to Flash a Xtrend ET5x00 series receiver by USB. Items you need before we start. 1. A suitable USB stick formatted to FAT32. (Preferably no larger than 8GB in size to prevent compatibility issues while flashing the image). 2. Image of your choice 3. Compression software such...
Continue reading
May 7, 2018 admin4k
TUTORIALS
How to Flash a Xtrend ET4x00 series receiver by USB. Items you need before we start. 1. A suitable USB stick formatted to FAT32. (Preferably no larger than 8GB in size to prevent compatibility issues while flashing the image). 2. Image of your choice 3. Compression software such...
Continue reading
May 7, 2018 admin4k
TUTORIALS
What you need before we start: 1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image). 2) Image of your choice. 3) Compression software such as 7zip, Winrar, Winzip 1. Format a USB stick to FAT32. 2. Download the image of your choice and...
Continue reading
January 11, 2018 admin4k
TUTORIALS
1.) Turn on the power switch of DM920 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM900 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM7080 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM7080 is in Rescue Mode 4.) You have to enter via browser -> “http://dm7080” (without “” ) or...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM820 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM820 is in Rescue Mode 4.) You have to enter via browser -> “http://dm820” (without “” ) or...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM525 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM520 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
What you need before we start: 1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image). 2) Image of your choice. 3) Compression software such as 7zip, Winrar, Winzip 1. Format a USB stick to FAT32. 2. Download the image of your choice and...
Continue reading
November 15, 2017 admin4k
TUTORIALS
