Home » Posts taggedflash

[TUTO] How to flash a Edision OS mini+ by USB

What you need before we start: 1. A USB stick formatted to FAT32. (Preferably genuine Kingston and no larger than 8GB in size to prevent compatibility issues while flashing the image). 2. Image of your choice. 3. Compression software such as 7zip. 4. HP Format tool (not essential...
Continue reading

[TUTO] How to flash a Edision OS mega by USB

What you need before we start: 1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image). 2) Image of your choice. 3) Compression software such as 7zip. 4) HP Format tool (not essential but recommended) 5) Teracopy (not essential but recommended) For this tutorial...
Continue reading

[TUTO] HowTo flash Image for DM920

1.) Turn on the power switch of DM920 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading

[TUTO] HowTo flash Image for DM900

1.) Turn on the power switch of DM900 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading

[TUTO] HowTo flash Image for DM7080HD

1.) Turn on the power switch of DM7080 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM7080 is in Rescue Mode 4.) You have to enter via browser -> “http://dm7080” (without “” ) or...
Continue reading

[TUTO] HowTo flash Image for DM820HD

1.) Turn on the power switch of DM820 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM820 is in Rescue Mode 4.) You have to enter via browser -> “http://dm820” (without “” ) or...
Continue reading

[TUTO] HowTo flash Image for DM525HD

1.) Turn on the power switch of DM525 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading

[TUTO] HowTo flash Image for DM520HD

1.) Turn on the power switch of DM520 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading