Home » TUTORIALS » [TUTORIAL] How to flash a VU+ DUO via USB memory stick

[TUTORIAL] How to flash a VU+ DUO via USB memory stick

What you need before we start:

1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image).
2) Image of your choice.
3) Compression software such as 7zip, Winrar, Winzip

1. Format a USB stick to FAT32.
2. Download the image of your choice and extract it to your desktop.

Images for Vu+ SOLO DUO

3. Copy the extracted folder “vuplus” to your USB Stick

Flashing the Receiver.

1) Power off the receiver
2) Insert the USB stick containing the image file .
4) Power the receiver on.
5) As your Duo starts to power up the flash progress should automatically begin with a readout of the
progress on the receivers display, just sit tight and wait for the receiver to do it’s thing

The flashing process should take approximately two to four minutes to complete, while the receiver
is being flashed it is vitally important that you DO NOT power the receiver down for any reason as
this can cause serious and or permanent damage.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*