Home » Posts tagged firmware (Page 6)

[TUTO] How to flash Vu+ DUO 4K

What you need before we start: 1) A USB stick formatted to FAT32. (Preferably compatibility issues while flashing the image). 2) Image of your choice. 3) Compression software such as 7zip, Winrar, Winzip 1. Format a USB stick to FAT32. 2. Download the image of your choice and...
Continue reading

[TUTO] HowTo flash Image for DM900

1.) Turn on the power switch of DM900 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading

[TUTO] HowTo flash Image for DM7080HD

1.) Turn on the power switch of DM7080 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM7080 is in Rescue Mode 4.) You have to enter via browser -> “http://dm7080” (without “” ) or...
Continue reading

[TUTO] HowTo flash Image for DM820HD

1.) Turn on the power switch of DM820 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM820 is in Rescue Mode 4.) You have to enter via browser -> “http://dm820” (without “” ) or...
Continue reading

[IMAGE] OpenPLi 6.0 for Vu+ DUO 2

OpenPLi is proud to present the next release of our image, OpenPLi 6.0. A lot has changed since OpenPLi 4, so we made a releasenote with all the changes. OpenPLi 5 was not released to the public, because we used it for our development to make OpenPLi 6....
Continue reading

[IMAGE] VTI 11.0.X for VU+ DUO 2

New VTi – Vu+ Team Image – VTi 11.0.x   From VTi Team VTi Panel (Blue Button)Supported languages: English, German, Dutch, Italian, Turkish, Danish, Polish, Russian, Ukrainian, Czech, Arabic, French, Swedish, Portuguese (Portugal), Greek, Bulgarian, Hungarian With modular, flexible VTi skins VTi Bootlogos and Radiomode Logo. Short press...
Continue reading

[IMAGE] OpenVIX 5.1 for VU+ DUO 2

OpenVIX 5.0 for VU+ DUO 2    OpenViX 5.0 is based on the OE-Alliance v4.0 core. You cannot perform an online update if you are currently on OpenViX 4.x or older. You can download and then flash the newer images using the USB method or simply by using...
Continue reading