Home »
Posts tagged Dreambox (Page 15)
1.) Turn on the power switch of DM7080 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM7080 is in Rescue Mode 4.) You have to enter via browser -> “http://dm7080” (without “” ) or...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM820 at the back 2.) Press Power-Button at the front until on display appears “entering setup” 3.) Now you can release Power-Button and DM820 is in Rescue Mode 4.) You have to enter via browser -> “http://dm820” (without “” ) or...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM525 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
1.) Turn on the power switch of DM520 at the back 2.) If LED on the Standby-Button at the front lights up, keep it pressed until LED quickly lights up red and blue 3.) When LED stops blinking then release Standby-Button 4.) After few seconds a info shows...
Continue reading
December 23, 2017 quest admin
TUTORIALS
Here is a tutorial on the installation and configuration of IPTV subscription on the DREAMBOX decoder under a MERLIN 4 image . IMPORTANT: This tutorial is valid for all versions of MERLIN. For this tutorial you need. Material: DM520 DM525 DM820 DM7080 DM900 DM920 Software: Winscp IPTV...
Continue reading
December 6, 2017 quest admin
IPTV